Me again. I purchased a Worcester 28i Combi with flue extension.
Would you recommend push-fit pipe fittings..beyond the copper pipework required to connect to the boiler?
I will hire a CH engineer to install the boiler and light it up...but do they mind if the home owner installs his own tubework...might he/she throw a fit and refuse to do the work?
Some are ok about you even installing the boiler yourself and just having them to come and check it and then pipe it up to the gas, some take great delight in telling you that you are not allowed to do anything at all. To cut down on cost, you could ask a corgi registered fitter to come and install it for you but tell him that you only want the hot water side of the boiler working and that eventually, when funds permit, you will have the central heating side done, then do it yourself. This is what I shall do when I move into my next house if CH is not fitted. Plastic pipe should not be fitted within I think it is 1m of the boiler so after that it should be ok from what it says in my installation guide for my combi.
I fitted a combi boiler and complete CH system in a two bed terraced house (for letting), having first asked a co-operative Corgi guy if he would make the final gas connections at the boiler and meter. he then tested it and gave me the necessary certificate for £50
Alternatively they might make up an amusingly high price for an "install only" job. Don't forget they usuaally expect to also get an extremely attractive income by supplying the boiler at a normal price after getting a very handsome discount at the local plumber's merchant and, if they fit enough of a particular brand, a holiday or at least a monogrammed toolbag as well. When I was trying to find someone local to do an install only on my Eco Hometec (badged MAN Micromat) combi, the most entertaining quote I got was around £1800 for install only. OK it included some moving around of pipework and chopping out the old cylinder and tanks but the guy was taking the p**s. I think there was something a bit pikey about him as well but I may have been imagining that. Oh, he also wanted to do the good old "power flush" scam for about an extra £500.
No problem with the push-fit but don't forget the inserts. If you pressurize your pipe-work first they may be less reluctant. Don't touch the gas. Noticed from another post Flushing is a must. If your system is about 10 years old and full of sludge would you want you new boiler especially a combi sucking up all that c**p, the manufacturers certainly don't
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.