8 discussions on HomeOwnersHub about the Honeywell T6360: what owners asked, what went wrong, and what fixed it.
My old room theromostat had 3 wiresL, N and one to pin 2 I guess for Call for heatI have bought a wireless stat, but the wiring diagramto the backplate shows 5 wires L,N and pins 1,2,3 are all used.Am I safe wiring the same backplate as my...
Good evening.I am trying to replace and old mechanical thermostat with a newwireless digital thermostat. At the moment the system is controlled byHoneywell ST6400C Programmer,The old thermostat is Honeywell T6360 wiring to the old...
Hi,I have an 18 month old 24hxi Glow worm boiler configured with aHoneywell 3 port valve, Llandis control panel, Honeywell wallthermostat and Honeywell cylinder thermostat. The system is configuredas the Honeywell Y plan, and can supply hot...
I'm fitting a 240V roomstat to a W-B 24i Junior combi boiler.I've run 3-core-and earth cable from the roomstat position all the way to the boiler, where it emerges from the wall out of site behind the boiler position.However, I understand...
I've recently replaced a Honeywell T6360 thermostat with a CM907Chronostat and I am generally very happy with it.There is one downside though. To give total control of the heatingover to the CM907 the main programmer/timer unit (a Potterton...
We have a Potterton Netaheat Profile 80e boiler which is controlled by a Potterton EP2001 timer and a Honeywell room thermostat. I think the roomthermostat is a T6360 but there are no markings on it.I'm looking to replace the EP2001...