6 discussions on HomeOwnersHub about the Delta 17-950L: what owners asked, what went wrong, and what fixed it.
Having recently had a minor windfall, I decided to splurge and finallyround out my budding shop. I have a budget of about $4K, and theentries below add up to about $3K. The rest will go on odds and ends,lumber, and anything that I may...
New in box Delta BS 14" (3/4 HP) from Lowes, $150. Achieved following in the footsteps of a friend via a "talkative" price match.I'm not really gloating, I'm just REALLY HAPPY about it! : ) When my dad and I used to go fishing, we used...
May be replacing my Delta 17-990 drill press.The run out is terrible and the service guy spent 3 hours trying toremedy the situation to no avail. On top of which, he found a lot ofbolts/nuts loose.Extraordinarily disappointing for what...
About 20 years or so ago, I got a cheap $99 drill press from an autoparts store. 20 speeds, floor model, 13" swing, MT2. I've gotten mymoney out of it, and it's long been on the "replace soon, if not next"list. My current project would...
Since becoming more involved with woodworking, I find the need toupgrade from my table top drill press to a floor model. Upon doing someminor research, I lack a bit of knowledge as to what main ingredientsdo I need to for a decent drill...
I need some physical measurements off of one. Not available in the book orfrom Delta that I can find.If you have one and can operate a caliper, I'll owe you a big fat favorand/or send you a goodie from here if I have something you need...