OT: Replacement water heater for home (NSOT??)

Ask friends and neighbors. What you're doing here is simple, even a competent handyman could do it, but local regs may require it be a plumber. I did my own. You may need to pull a permit, I'd ask the plumbers about that, so you don't find an extra surprise charge later. If you get it all in writing, it's one of the simplest things, shouldn't be too much that can go wrong. Sometimes the gas utility also sells appliances too.

Right. Unless it leaked, and that being the reason for replacement, I'd have hot water for at least a couple of days if I conserved.

ny hot water in a power failure.

the standard old tanks tend to be long lived dependable and require routine service

tankless generally require a 120 volt outlet, many usea forced power vent, basically a blower.

th

Whew ;> and big grin! Although, from what I've read, a power shut-off might be required :/ (?) I'm still working on my 'homework/research' and learning about water heater replacement . . . .

Sky

================================ Kitchen Rule #1 - Use the timer! Kitchen Rule #2 - Cook's choice! ================================

That they do, as evidenced by my ancient, 30-plus year-old hot water heater since it lasted so long before it recently failed. As already mentioned, I've anticipated its incipient failure, so it's no surprise. However, I am caught rather unawares - oh well ;> Such is Life, eh!

I am a firm believer that forearmed with knowledge is a good thing! I'd rather not be taken advantage because some 'sales' person believes I'm an easy mark due to gender!

Sky

================================ Kitchen Rule #1 - Use the timer! Kitchen Rule #2 - Cook's choice! ================================

Indeed, I am asking people and folks I know who've had to use plumbers. That's why I also ask here ;) AHR and RFC have a plethora of good folks who can share their experiences similar to mine.

Yes, a permit and subsequent inspection is required -- I checked . Even if "I" were to do this job own my own with a knowledgeable relative, a permit/inspection is still required. However, I want to save my sanity - vbg - so I'll most likely forego my relative's help, spend the extra money and use the services of a "professional" plumber.

I also checked with the utility company - alas, no recompense there re: rebates, etc.

Heh, I received one "estimate" so far with one local HVAC/plumbing company - and it was most unsatisfactory since I specifically requested line-item details! Only a bottom line cost ($1250 -- vocally stated that $800 was for heater & $450 for labor!) was provided! To say the least, I won't use their service!

Sky

================================ Kitchen Rule #1 - Use the timer! Kitchen Rule #2 - Cook's choice! ================================

Another topic we've discussed to death about differences between the US and the UK.

check home depot, lowes and sears if they are still in your area.........

Hev DID specify it was a natural gas water heater - so I'm VERY doubtfull there will be any effect on his electrical service - - - -

The more expensive longer warranted units USUALLY have additional features like a turbulator tube, bras instead of plastic sediment drain, and 2 instead of 1 anodes. - just for starters. That's the difference between 3, 6, and 9 year tanks up here anyway. The differencwe between a 9, 10, or 12 year warranty and "as long as you own the house" would LIKELY be just the insurance.. And they are betting you won't still own the house 15 years from now. THAT warranty is not transferrable - while a 9, 10, or 12 year quite possibly is.

Doesn't work too well with forced air heat

The tankless MAY require upgrading his gas supply. Thery use about

Which is why my last replacement was based on the age of the old one. It was close to 20 years old, not up to current code and not energy efficient. So I built replacement into the budget before I had a flood to have to deal with.

His were power vent, in all likelihood - and no standing pilot.

Yup - not a case of if, but when. They are expensive to buy, to install, and to service. They require a LOT more fas supply capacity if gas, or a much higher current breaker if electrical - often requiring the upgrading of either the electrical service or gas serviced - at SIGNIFICANT cost to you.

Would not pass inspection here in Waterloo Ontario. Not even if it was a GFCI (required within 6 feet of water. Many places would not allow that crappy stainless steel flex gas line either. - and if they did it would HAVE to be yellow-jacket.

It's just Stormey's "blame it all on Obama" mentality.

After posting I also noticed the mains power cable isn't in conduit, that definitely would not pass here in Australia. Probably same for the gas lines too, as you mentioned. But I've seen much worse examples around these parts.