Is there a standard width for a frieze board when the corner boards are made
from 1" x 4" 's ?
On the side of a building where the roof peak is, does the frieze board run
into the corner board?
For a water table trim board, does the trim board run into the corner
boards, or do the corner boards rest on top of the water table trim?
thank you for your time.
The frieze and the water table are continuous and the corner trim
butts into both. There is no standard width for frieze boards.
They must be wide enough for their intended purpose, but beyond
that, it is all up to the eye of the beholder. I have seen them as
1x2 with a closed soffit, to a 1x16 with an open soffit.
HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.