How to Replace a Drum Trap: Step-by-Step Guide with Videos

Replacing a drum trap requires some plumbing knowledge and the right tools. Here are some steps that can guide you through the process:

1. Remove any remaining water from the bathtub and bail it out.
2. Remove the cap of the drum trap using an adjustable wrench. If the cap is stuck, use a hammer and cold chisel (or screwdriver) to loosen it.
3. Once the cap is removed, you can access the blockage inside the drum trap.
4. Use a plumber's snake or other tools to clear the blockage.
5. Remove the old drum trap and cut out the pipes leading to it.
6. Install a new PVC P-trap drain assembly and connect it to the existing plumbing using either threaded connectors or no-hub fittings.
7. Test the new assembly by running water through it.

There are many resources available that can guide you through this process, including online videos and step-by-step guides. It's important to note that replacing a drum trap can be a complex task, so if you're not comfortable doing it yourself, it's best to call a professional plumber.