After something like six years of saving and telling myself 'someday', the dual fuel range I've wanted forever finally landed in my kitchen last week. Red knobs and all. I'm over the moon, but I've got one thing bugging me. Every time I run the oven so far, there's this faint burnt, almost plasticky smell that hangs around for the first 20 minutes or so. It's not strong enough to set off the smoke alarm, and nothing's visibly smoking, but it's definately there. The first roast I did tasted fine, so maybe I'm paranoid. I've heard new ovens can give off some odor from factory coatings burning off, but nobody warned me about this. Does it fade after a handful of uses, or is something actualy wrong? I read somewhere you can run an empty oven hot for a bit to speed it up. Is that a real thing or internet nonsense? And if I do that, how long and how hot are we talking? Would love to hear from anyone whose oven did this and came out the other side normal.
Is it normal for a brand new oven to smell weird the first few bakes?
Nov 10, 2026
Last reply: 4 days ago
5 Replies
Follow replies to this discussion?
First reply
Totally normal, and the empty oven trick is real. Manufacturers coat the oven cavity and racks with oils to protect the metal during shipping and assembly, plus there's residual moisture curing out of the insulation around the cavity. First handful of uses burns all that off…
Read the full replyInformation here may be outdated?
Totally normal, and the empty oven trick is real. Manufacturers coat the oven cavity and racks with oils to protect the metal during shipping and assembly, plus there's residual moisture curing out of the insulation around the cavity. First handful of uses burns all that off and yes, it smells faintly burnt and a little like hot plastic. If your roast tasted fine, that confirms it's not food related. It's the oven breaking itself in. The way to speed it up: open a window or run the range hood, take any racks you don't absolutely need out, wipe the cavity down with a damp cloth to remove any packing residue, then run it empty at around 450 for 45 minutes to an hour. Some people go hotter, some do two or three cycles over a couple of days. Don't be surprised if you get a little wisp of smoke or the smell gets stronger for a bit before it gets better. That's the coating actually burning off instead of slowly cooking. Let it cool, wipe the interior again, and you're mostly done. For me the smell was noticeably weaker after the second or third use and basicly gone by a week of regular cooking. If it's still hanging around after five or six sessions, or it starts smelling sharp or chemical in a new way, that's when you'd call the dealer or the manufacturer, but that's rare.
One thing to keep in mind since yours is dual fuel: the smell from oven burn-off is diffrent from a gas leak. Burnt coating smells like hot electronics or new-car interior. A gas issue smells like rotten eggs because of the odorant added to it. If you ever get that smell near the cooktop, that's a different situation entirely. But based on what you're describing, you've just got a new oven doing new oven things. Run the burn-off cycles and enjoy it.
Congrats on the six year wait paying off. I did appliance deliveries and installs for 11 years and I can tell you the ones that get hauled across the country in a hot truck smell the worst, the factory coating basically bakes on during transit. One trick that helped my sister with her range: do a throwaway bake after the burn-off cycles, like a pan of cheap cookie dough, because whatever smell is left tends to latch onto the first real food you cook. Toss the cookies, and by the next bake you're in the clear. Also run that hood on high the whole time, the smell lingers in the kitchen way longer than you'd expect otherwise.
Mine did the same thing back in the nineties and I panicked just like you. My old man told me the same thing the appliance guys on here are saying, run it empty hot a couple times. He learned that working at a stove shop in the 60s, so it's not internet nonsense, it's been standard practice longer than most of us have been alive. His old trick was to crack a window and bake a pan of water with a splash of vinegar in there after the empty cycles, said it settled the smell down quicker. wether that's true or just made the kitchen smell like pickle brine I never figured out, but the burnt odor was gone inside a week.
Same thing happened when we got our range last fall. The one thing that actually made a difference for me was a cheap box fan sitting in the kitchen window blowing outward during the burn-off runs. I'd first tried just cracking a window and the smell just kind of sat in the house all evening. With the fan pulling air, it never realy built up inside and the whole break-in took maybe two evenings of cooking. Also, don't forget the racks, mine had that same coating on them. Gave them a scrub with regular dish soap once everything cooled and that helped too.
Curious about the racks bit here. When mine stunk, the racks were honestly the worst part, that oily stuff from the factory was all over them and even the outside of the door handle had it. I wiped everything down with a wet rag and a drop of dish soap before running it hot and that helped a ton. Question though, do you leave the extra racks out for good or just during the break in? Mine have been sitting on the counter for a week becasue I keep forgetting to ask.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required