Hi! I`m new to this group!
I have this Sand Blasting Gun:
The problem is that i cant work for much time before I loose pressure.
Do you think I can solve this problem by getting a 100lts tank with the same engine?
Regards!
Your compressor should have a rating plate showing CFM @ PSI .
Your blaster needs 11.5 avg. SCFM requirement at 90 PSI.
You are probably going to have a short cycle of blasting , then waiting for the compressor to recharge.
I dont think a bigger tank will do much for you, the compressor pump is the limiting factor.
The bigger tank will take longer to charge , but would then give you a longer work time but then a longer recharge time between work periods.
No. It will give you a little more time, but it will take even longer to re-charge. There is no real substitute for the CFM you get from a larger compressor. You are probably putting about 4 to 5 CFM into the tank, but using a tool that takes out 11CFM.
You won't solve the problem, but you will make it last longer before you have to wait. BUT you'll have to wait longer also.
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.