had the bits accessible from the inside all out again. filter are clear. Under the grille there are 3 channels (approx 1/2" diameter). One (@ 9pm) is for pumping out. Dont know about the other 2 - but they are both clear. below the grille are 2 small (~2mm) holee which are clear - at least whe poked with a nylon bristle brush down the hole.
How do i get at the pump ?
fixed - guy came to do it.
Watrer is recycled through one of the holes at te bottom under the filter adn then pases throught a pressure sensor on the LH front side. The pipe from the base of the DW passes through float/pressure sensor. the entry pipe was gunged up - just needed dynarodding out with a small length of plastic
Have something to add? Share your thoughts — no account required.
Ask the community — no account required