Grizzly G0690

8 discussions on HomeOwnersHub about the Grizzly G0690: what owners asked, what went wrong, and what fixed it.

What owners report

Shop Wall and Electric

Prompted by suggestions that a shop needs convenient power, I created a (pdf) SU view of my proposed outlet configuration (for one wall), and also a corresponding wiring model: or suggestions welcome. In fact, all I seek is a simple nod....

Woodpecker Rules

Turns out Woodpecker has two 24"rules,one mainly for measuring ($30) and one mainly forsetting up tools($40)-it's called SERX. Both are Aluminum.The first rule looks dandy, with it's engraved markings and angled edge.I would have expected...

Router bit for cutting Deep mortise

I wish to cut 1/2" wide mortises all the way through a fourbyfour (cutting from both sides of course). Was just about to order the Amana bit# 45426 which is a double-fluted straight plunge bit, with 1/2" shank, 1/2" cutting diameter and a...

Considering Used Tools

I just found a TS (Unisaw) and a Jointer coming up for auction. I posted pdf pictures of them on my web site: can you tell from looking (I'm sure your eyes are more learned than mine..). The jointer, at least, appears to have a 4" DC port....

Blowing sawdust around

Amazon brought this to my attention: Vacuum ED500 DataVa 500-Watt, .75 HP Electric Duster (actually a blower).I know you're supposed to blow the dust off of equiptment and out of motors every once in a while. Do you folks who do this use...

All discussions