Grizzly G0453 owner's manual: Section 8: wiring

SECTION 8: WIRING

These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Compare the manufacture date of your machine to the one stated in this manual, and study this section carefully.

If there are differences between your machine and what is shown in this section, call Technical Support at (570) 546-9663 for assistance BEFORE making any changes to the wiring on your machine. An updated wiring diagram may be available. Note: Please gather the serial number and manufacture date of your machine before calling. This information can be found on the main machine label.

WARNING

Wiring Safety Instructions

SHOCK HAZARD. Working on wiring that is connected to a power source is extremely dangerous. Touching electrified parts will result in personal injury including but not limited to severe burns, electrocution, or death. Disconnect the power from the machine before servicing electrical components!

MODIFICATIONS. Modifying the wiring beyond what is shown in the diagram may lead to unpredictable results, including serious injury or fire. This includes the installation of unapproved aftermarket parts.

WIRE CONNECTIONS. All connections must be tight to prevent wires from loosening during machine operation. Double-check all wires disconnected or connected during any wiring task to ensure tight connections.

CIRCUIT REQUIREMENTS. You MUST follow the requirements at the beginning of this manual when connecting your machine to a power source.

WIRE/COMPONENT DAMAGE. Damaged wires or components increase the risk of serious personal injury, fire, or machine damage. If you notice that any wires or components are damaged while performing a wiring task, replace those wires or components.

MOTOR WIRING. The motor wiring shown in these diagrams is current at the time of printing but may not match your machine. If you find this to be the case, use the wiring diagram inside the motor junction box.

CAPACITORS/INVERTERS. Some capacitors and power inverters store an electrical charge for up to 10 minutes after being disconnected from the power source. To reduce the risk of being shocked, wait at least this long before working on capacitors.

EXPERIENCING DIFFICULTIES. If you are experiencing difficulties understanding the information included in this section, contact our Technical Support at (570) 546-9663.

NOTICE

The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com.

COLOR KEY

-46-
G0453/G0454 (Mfg. Since 3/08)

G0453 Wiring Diagram

Magnetic ON/OFF Switch

• A1 (Wt)
• 1L1 (Rd)
• 3L2
• 5L3 (Bk)
• NO13 (Rd)
• A2
• Contactor NHD 09D 220V
• 17 (ON)
• 18
• NO14 (Rd)
• A2 (Rd)
• 2T1
• 4T2
• 6T3
• OL Relay NHD BTH-25
  • OFF
  • 98, 97, 96, 95
• 2T1
• 4T2
• 6T3
• Grnd (Gn)

WARNING! SHOCK HAZARD! Disconnect power before working on wiring.

NOTICE The motor wiring shown here is current at the time of printing, but it may not match your machine. Always use the wiring diagram inside the motor junction box.

NEMA 6-20 Plug (As Recommended)

• Hot (Wt)
• Ground (Gn)
• Hot (Bk)
• G

Motor

• Grnd (Gn)
• Start Capacitor 200MFD 250VAC (Bk)
• Run Capacitor 20MFD 400VAC (Rd)

G0453/G0454 (Mfg. Since 3/08)

STOP READ ELECTRICAL SAFETY ON PAGE 46! -47-

G0454 Wiring Diagram

Magnetic ON/OFF Switch

WARNING! SHOCK HAZARD! Disconnect power before working on wiring.

NOTICE The motor wiring shown here is current at the time of printing, but it may not match your machine. Always use the wiring diagram inside the motor junction box.

NEMA L6-30 Plug (As Recommended)

Motor

-48- STOP READ ELECTRICAL SAFETY ON PAGE 46! G0453/G0454 (Mfg. Since 3/08)

SECTION 9: PARTS

G0453 Headstock Breakdown

G0453 Headstock Parts List

-50-

G0453/G0454 (Mfg. Since □/□□)

G0453 Table Breakdown

G0453 Columns Breakdown

-52- G0453/G0454 (Mfg. Since 3/08)

G0453 Cabinet Stand Breakdown

For Machine Manufacture Date Prior to 03/08 430-1, 430-2, 430-3, 430-4, 430-5, 430-6

For Machine Manufacture Date of 03/08 or After 430A-1, 430A-2, 430A-4, 430A-5, 430A-6

430 430A

440 441 436 450 449 428 429 438 439 427 434 454 453 444 445 435 431 432 433 437-1 437 407 406 409 408 429 405 402 442 401 401-1 429 428 448A 441

410 411 412 413 443 417 416 414 445 444 418 423 424 426 422 421 420 419 425 416 415

G0453/G0454 (Mfg. Since 3/08) -53-

G0453 Cabinet Stand Parts List

-54- G0453/G0454 (Mfg. Since 3/08)

G0453 Gearbox Breakdown

G0453 Label Placement

WARNING

Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact Grizzly at (800) 523-4777 or www.grizzly.com to order new labels.

-56- G0453/G0454 (Mfg. Since □/□□)

G0454 Headstock Breakdown

109A 107 108 109 6 41 39 42 40 17 46 43 45 44 47 48 48A 49 50 51 65 64 68 67 97 12 9 15 34 32 14 13 30 29 11 5 37 36 10 77 79 80 69 72 57 58 35 37 38 8 70 71 117 19 18 59 106 103 102 24 20 27 28 29 26 25 98 99 96 94 93 95 73 74 76 75 82 81 83 84 85 86 87 92 4 101 61 62 63 62 60 110 111 113 112 114 104 116 115 88 90 91 100 89 105 Machine Manufacture Date Prior to 03/05 105A Machine Manufacture Date of 03/05 or After 105-1 105-2 55 56 52 53 52 54 3 3-1 3-3 3-4 3-5 19 2 3-2

G0454 Headstock Parts List

-58- G0453/G0454 (Mfg. Since □/□□)

G0454 Headstock Parts List

G0454 Table Breakdown

G0454 Columns Breakdown

G0454 Cabinet Stand Breakdown

-62- G0453/G0454 (Mfg. Since 3/08)

G0454 Cabinet Stand Parts List

G0454 Gearbox Breakdown

-64- G0453/G0454 (Mfg. Since 3/08)

G0454 Label Placement

WARNING

Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact Grizzly at (800) 523-4777 or www.grizzly.com to order new labels.

G0453/G0454 (Mfg. Since □/□□) -65-

-66-

G0453/G0454 (Mfg. Since 3/08)

Grizzly WARRANTY CARD

Name_______________________________________________________________ Street_______________________________________________________________ City ___________________________________ State____________________ Zip ____________________ Phone #_______________________________ Email ________________________________ Model #_______________________________ Order #_______________________________ Serial #_______________________________

The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services. Of course, all information is strictly confidential.

1. How did you learn about us? ____ Advertisement ____ Friend ____ Catalog ____ Card Deck ____ Website ____ Other:

2. Which of the following magazines do you subscribe to? ____ Cabinetmaker & FDM ____ Popular Science ____ Wooden Boat ____ Family Handyman ____ Popular Woodworking ____ Woodshop News ____ Hand Loader ____ Precision Shooter ____ Woodsmith ____ Handy ____ Projects in Metal ____ Woodwork ____ Home Shop Machinist ____ RC Modeler ____ Woodworker West ____ Journal of Light Cont. ____ Rifle ____ Woodworker’s Journal ____ Live Steam ____ Shop Notes ____ Other: ____ Model Airplane News ____ Shotgun News ____ Old House Journal ____ Today’s Homeowner ____ Popular Mechanics ____ Wood

3. What is your annual household income? ____ $20,000-$29,000 ____ $30,000-$39,000 ____ $40,000-$49,000 ____ $50,000-$59,000 ____ $60,000-$69,000 ____ $70,000+

4. What is your age group? ____ 20-29 ____ 30-39 ____ 40-49 ____ 50-59 ____ 60-69 ____ 70+

5. How long have you been a woodworker/metalworker? ____ 0-2 Years ____ 2-8 Years ____ 8-20 Years ____ 20+ Years

6. How many of your machines or tools are Grizzly? ____ 0-2 ____ 3-5 ____ 6-9 ____ 10+

7. Do you think your machine represents a good value? ____Yes ____No

8. Would you recommend Grizzly Industrial to a friend? ____Yes ____No

9. Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than 3 times. ____Yes ____No

10. Comments: _______________________________________________________________________ _________________________________________________________________________________ _________________________________________________________________________________ _________________________________________________________________________________

CUT ALONG DOTTED LINE

FOLD ALONG DOTTED LINE

Place Stamp Here

GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069

FOLD ALONG DOTTED LINE

Send a Grizzly Catalog to a friend:

Name______________________________________ Street_____________________________________ City_________________State_________Zip_________

TAPE ALONG EDGES--PLEASE DO NOT STAPLE

WARRANTY AND RETURNS

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly's sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. In no event shall Grizzly's liability under this warranty exceed the purchase price paid for the product and any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.

We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special, or consequential damages arising from the use of our products.

To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then issue you a "Return Number," which must be clearly posted on the outside as well as the inside of the carton. We will not accept any item back without this number. Proof of purchase must accompany the merchandise.

The manufacturers reserve the right to change specifications at any time because they constantly strive to achieve better quality equipment. We make every effort to ensure that our products meet high quality and durability standards and we hope you never need to use this warranty.

Please feel free to write or call us if you have any questions about the machine or the manual.

Thank you again for your business and continued support. We hope to serve you again soon.

grizzly.com®

TOOL WEBSITE

Buy Direct and Save with Grizzly® – Trusted, Proven and a Great Value! Since 1983

Visit Our Website Today For Current Specials!

ORDER 24 HOURS A DAY! 1-800-523-4777