Churchill reclining chair - a bit OT

I recently acquired a used Churchill brand reclining/massage chair (for my dotage!) in good working order, but with no documentation.
Yesterday while it still reclines etc., all of the other functions ceased to work. Investigation revealed that the low voltage cable got pinched in the mechanism, stripping the insulation. I guess this may have buggered the plug type transformer
I've no worries about replacing it, but thought I'd just do a web search for the maker's contact address and see if I can't get it properly serviced.
Having spent nearly four hours of staring at my monitor, trying every combination of syntax that I can think of, I'm damned if I can find a trace of who the manufacturer might be - let alone a web address!
I know that Churchill is the brand because this name, but nothing else, appears on the up/down controller. Can anyone assist with a web site or phone number, please?
-- GB Extract digit to email.
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload
Just remove the damaged cable and reconnect yourself - solder or use connectors and insulate with heatshrink or insulating tape (for quick fix) I doubt the transformer is damaged but even if it is just go to an elctronics supplier and buy an equally rated one.
Don't bother contacting Churchill unless you want to re-mortgage your house.
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload
There was a dead short across the cable and there is no output from the transformer. I'll replace it and take your advice re Churchill. Thanks -- GB Extract digit to email.

Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.