Latest threads in Home Repairshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
substitute for "1/4" v notch" trowel
I'm going to be putting one of those tub wall surround kits from Home Depot (ASB brand). The instructions call for a "1/4 v-notch" trowel to spread the adhesive on the wall. However, I'm...
7
|
15 years ago
|
7 | |
|
|
RED electrical wire in ceiling junction box
Thanks in advance. I am installing a light fixture with three wires: Black - Hot White - Neutral Copper - Ground The Junction has four wires coming out. They are all capped as this junction box has...
14
|
15 years ago
|
14 | |
|
|
Chimney Balloon
I am thinking of getting one. Anyone have a cheaper solution? I do want to be able to insert/remove it.
2
|
15 years ago
|
2 | |
|
|
Handyman rates
I realize rates are different throughout the country, but I was wondering about what rates are in your area. I recently got a flyer in my paper box. This person advertises, HVAC, electrical, &...
59
|
15 years ago
|
59 | |
|
|
what do I do with a 22 long rife bullet that did not fire
a bit off topic... What should I do with those "dud" 22 long rifle cartridges/bullets that do not fire? I usually try to fire them a 2nd or 3rd time, but sometimes they don't fire. So I have this...
48
|
15 years ago
|
48 | |
|
|
Replacing wall-mounted toilet tank? (Afraid of other issues)
We have been nursing our old bathroom toilet for a long time. It's one of the ones with a larger tank that uses more water flushing and that's the reason we've nursed it, because for some...
18
|
15 years ago
|
18 | |
|
|
New Door, adjustable sill problem
I just put in a new door for our entryway. The old door was all wood, weighed about 3,000 lbs and was just drafty, it was time for a new one. So after all was said and done I put the new door in....
3
|
15 years ago
|
3 | |
|
|
Installing Recess lighting - what to do with plastic tabs?
Folks, I'm upgrading my current recess lighting to air-tight IC fixtures (Halo). In the wiring compartment, the normal wires exist, but they have plastic "tabs" at the end of wires. These "tabs"...
2
|
15 years ago
|
2 | |
|
|
Bed-sheet sizes
I gotta old "full" bed/mattress circa maybe 1970. Ancient "full" fitted sheet fits well but it's pretty much worn out. Last year I go to JC Penny, get a nice "full" 250 thread count sheet set, and...
18
|
15 years ago
|
18 | |
|
|
Recommend a strong glue for fixing a broken metal lamp?
Hi Everyone, We have a ornamental lamp, much like the old british street lamps much like the one at: are using it indoors, and it tipped over, with two of the three frames surrounding the lights...
4
|
15 years ago
|
4 | |
|
|
Wood Stove Repair
Hi...just purchased a fairly old cast iron wood stove. Some of the "cement" in the corners is worn away or cracked, therefore breaking the air tight seal. What type of cement or caulking is used for...
1
|
15 years ago
|
1 | |
|
|
Check Your Furnaces
Here's another reason to perform regular maintenance on your furnace even if it's running fine... My 3 YO furnace seemed to be cycling on and off when it first fired up, so I suspected a dirty...
10
|
15 years ago
|
10 | |
|
|
CertaPro Painters
I'm Thinking about getting these people to do some painting in my home. Just wondering what people in this group think of them. TIA, EJ in NJ
—
|
15 years ago
|
— | |
|
|
Hot on Left, Cold on Right?
I'm installing a laundry outlet box. Does the rule "Hot on Left, Cold on Right" apply to a washing machine supply? I know this is a plumbing rule, but does this rule strictly apply to laundry? It...
25
|
15 years ago
|
25 | |
|
|
Replacing Interior Door Doorknob Question
Over ten years ago I pretty much replaced all the doorknobs in our house as the old ones were corroded or scuzzy looking. Our house is over 50 years old and the hole in each door was sort of just a...
3
|
15 years ago
|
3 |