Dealing with a Blinking Light on Your Silver Crest Dehumidifier: Troubleshooting Tips (2023 Update)

If your Silver Crest dehumidifier's light is blinking but the motor is not working, there may be a number of potential issues causing the problem. Based on our research, here are some troubleshooting tips you can try:

1. Check the Humidity Level: If someone inadvertently turned up the humidity level on the dehumidifier, it might not be coming on because the room's humidity level is not high enough. Check to see that the desired humidity level is set properly.
2. Check the Humidity Sensor: The problem may be with the humidity sensor. Most electronic control models will use a sensor to monitor the relative humidity which then relays that information to the control board. The control board then uses this information to power the compressor and fan circuits when required. If the sensor is not working properly, the compressor and fan circuits may not turn on.
3. Clean the Dehumidifier: If your dehumidifier is making a loud humming noise, there may be dirt gathering on the internal parts of your machine. This can impede normal operation, so make sure that you clean and vacuum your dehumidifier right away. Additionally, if the dehumidifier is not collecting water, it may be due to an issue with the internal parts.
4. Check the Electrical Contacts: Sometimes the electrical contacts can become welded shut or corroded, and are unable to signal the compressor to turn on. To perform this dehumidifier repair, turn the dial on the humidistat and listen for the click sound that indicates it is working. You can also test the contacts for continuity using a multi-meter.

If none of these steps solve the issue, it may be best to call in a professional to diagnose and repair the problem. Keep in mind that attempting to repair the dehumidifier yourself may void any warranties or cause further damage to the unit.

So there you have it - some potential troubleshooting steps to take if your Silver Crest dehumidifier's light is blinking but the motor is not working. Good luck with your repairs!