How to Fix the Handle Release Button on Your Hoover Steam Vac (2023 Update)

Get some tools, disconnect the handle properly, inspect the issue, and fix it.

Hi there! It sounds like you're having trouble with the handle release button on your Hoover steam vac. That can definitely be frustrating, but there are some steps you can take to fix it.

Here's how to fix the handle release button on your Hoover steam vac:

1. Turn off the power: Before you start working on the steam vac, make sure that the power is turned off and the machine is unplugged.
2. Remove the water tank: Take the water tank off of the steam vac and set it aside.
3. Locate the handle release button: The handle release button is usually located near the bottom of the handle. It may be held in place with screws.
4. Remove the handle release button: Using a screwdriver, remove the screws that are holding the handle release button in place. Then, carefully remove the button from the handle.
5. Inspect the button: Check the button to see if it's broken or if any parts are missing. If it's just a small piece that's broken, you may be able to glue it back together.
6. Replace the button: If the button is beyond repair, you'll need to replace it. You can order a replacement button from Hoover or from a third-party supplier.
7. Reassemble the steam vac: Once you have the replacement button, put it in place and screw it in. Then, put the water tank back on the steam vac.

Now, let's talk about what tools and materials you'll need:

• Screwdriver

• Replacement handle release button (if needed)

• Glue (if you're repairing the button)

If you're not comfortable working on the steam vac yourself, it may be best to take it to a professional. They'll have the tools and expertise needed to fix the issue safely and effectively.

Not certain about the model, obviously, as it was not provided, but here is the repair manual for one of the common Hoover models, Hoover SteamVac F5810 in case you can use it