Fine-tuning Your RCA/Whirlpool Gas Oven Pilot (2023 Update)

I understand you're looking to make some adjustments to the pilot of your RCA/Whirlpool built-in oven model# HG 295P. Adjusting the pilot is a task that can be done by a homeowner with some DIY experience, but it's important to take necessary precautions and follow all manufacturer's instructions.

Here's what you'll need to do:

1.Locate the pilot adjustment screw. This is usually located near the pilot light, and can be found by referring to your oven's owner's manual or by contacting the manufacturer.

1. Turn off the gas supply to your oven. This is typically done by turning off the gas valve located near the oven.
2. Locate the pilot flame. The pilot flame should be blue and steady. If it's yellow or flickering, it means the pilot flame is not adjusted correctly.
3. Use a small screwdriver to adjust the pilot flame. Turn the screw in small increments until the flame is blue and steady.
4. Turn the gas supply back on.

Test the oven to ensure that it's working properly.

It's important to note that adjusting the pilot on your oven may affect other appliances that are connected to the gas line, so it's best to proceed with caution. If you're unsure about how to make the adjustments, it may be best to consult with a professional.