Amana washer commercial heavy duty belt burnt off . What could be the cause? (2023 Update)

Well, howdy there! Thanks for reaching out about your Amana washer. I've been fixing up homes for 20 years, and I've seen this issue before. It's a doozy, but I'm happy to help you out.

First things first, let's talk about the pros and cons of fixing the issue yourself versus hiring a pro. Now, if you've got some DIY experience under your belt, you might be able to tackle this one. But it's important to keep in mind that fixing an issue like this can be tricky, and it might require some specialized tools and know-how. If you're not confident in your abilities, it might be best to leave it to the pros.

That being said, let's dive into the issue. The fact that the belt burnt off is a pretty good indicator that there's something going on with the motor or the pulley system. It's possible that the pulley is loose or the motor is working too hard, causing the belt to slip off or burn out. It's also possible that the belt was just old and worn out, and it was time for a replacement.

To troubleshoot the issue further, here are some steps to follow:

Unplug the washer and remove the back panel to access the motor and pulley system.
Check to see if the pulley is loose or wobbly. If it is, it might need to be tightened or replaced.
Check the motor to see if it's working properly. If it's making strange noises or vibrating excessively, it might be the cause of the issue.
Inspect the belt for any signs of wear and tear. If it's cracked or frayed, it's time for a replacement.

Now, if you're feeling up to the challenge, here are the tools and materials you'll need to fix the issue:

New belt (make sure it's the correct size and model for your washer)

Socket wrench

Screwdriver

Pliers

Of course, if you're not confident in your ability to fix the issue, it's always a good idea to call in a pro. They'll have the know-how and tools to get the job done right.

To summarize, it's important to weigh the pros and cons of fixing the issue yourself versus hiring a pro. If you decide to tackle the issue, troubleshoot by checking the pulley system, motor, and belt, and make sure you have the right tools and materials on hand. And as always, if you're not confident in your abilities, call in a pro to get the job done right.