Studio Woodworker - Dancing Rings

Since my transformation to a Rotationiste, the artistic flood gates have opened and the pieces are appearing as if by magic. Maybe I'm channeling a deceased spindle turner. The latest creation is The Rings of Redwood aka The Dancing Rings, the third in my Paradox Series. Took maybe and hour. With a little more practice I could probably get it down to maybe half an hour.

formatting link
previous page has it "static" (6th image down)

Haven't found a pair of clogs yet but saw a great monocle.

Chawls Bayldon The Rotationiste formerly known as charlie b

Reply to
charlie b
Loading thread data ...

Chawls Bayldon"iste" wrote:

formatting link
huh? Nice bunch of exercises you've got there! So, the rings are loose on the spindle? That's some interesting work. If I'm right, you undercut 'til it falls off the spindle? Does it freak you out a little when they cut loose? Just thinking about it gives me a bit 'o the willies. Okay, here's the straight line: What kind of saw do you use on a monocle? Tom

Reply to
tom

yes

Well you got the undercut part right - but the final cut through was done wih the lathe off and the piece turned by hand while the long point of the skew severs the last bit of wood. I do the undercutting at the lowest speed on this lathe - 500 RPMS which comes out to 8 1/3rd revs/second. Even at that speed a catch can do its damage way before you can react. A spiral groove in the almost finished piece can be discouraging.

OK, I'll bite. What kind of saw do you use on a monocle?

Reply to
charlie b

Charly B wriote: OK, I'll bite. What kind of saw do you use on a monocle?

Oh, I thought you had the punchline there...Okay, how about a keyhole? (Badump-bump) Tom

Reply to
tom

A "see" saw, of course.

Reply to
lgb

lgbwrote: > OK, I'll bite. What kind of saw do you use on a monocle? A "see" saw, of course.

Well done! Tom

Reply to
tom

GROANNNNNNNNNN.

Reply to
charlie b

And if it's not done right, you'll end up with an eye saw.

Reply to
Larry Jaques

What, what did you saw?

+--------------------------------------------------------------------------------+ If you're gonna be dumb, you better be tough +--------------------------------------------------------------------------------+
Reply to
Mark & Juanita

You din't pernuncikate it rightly, Mark.

"An eye saur."

- Inside every older person is a younger person wondering WTF happened. ---

formatting link
Website Application Programming

Reply to
Larry Jaques

LOL Not used to non-southern pronounciations anymore.

+--------------------------------------------------------------------------------+ If you're gonna be dumb, you better be tough +--------------------------------------------------------------------------------+
Reply to
Mark & Juanita

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.