I need to replace some bullet catches - preferably of the same size as the originals. They are a 3/4 inch ball with a 7/8 inches outside diameter;thay have an adjustable feature for the depth of the ball. Does naybody know where I can buy 2 dozen of them?
Brainerd Mfg used to make them as (if I recall properly after 8 years) the
697.Don't know if they still do, but you can check with them if you can find them.
| I need to replace some bullet catches - preferably of the same size | as the originals. They are a 3/4 inch ball with a 7/8 inches outside | diameter;thay have an adjustable feature for the depth of the ball. | Does naybody know where I can buy 2 dozen of them?
Haefele makes a variety of different sizes and types. I went here and used their online catalog to find bullet catches under "furniture locks and catches":
Their product is ok, though.
-- Morris Dovey DeSoto Solar DeSoto, Iowa USA
On Mon, 26 Sep 2005 21:02:05 -0700, with neither quill nor qualm, Mark & Juanita quickly quoth:
"OUCH!" he squeaked, in a much higher-than-normal tone of voice.
I get your meaning, but ours were mounted at the top of the door.
+--------------------------------------------------------------------------------+ If you're gonna be dumb, you better be tough +--------------------------------------------------------------------------------+HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.