FS 30% off all planes

30% Off planes of all sorts. The Plow plane is finished. It is a simple setup with 6 standard blades. ¼" 3/16" 3/8" ½" 5/16" and 3/4" and ¼" thick. The steel sole is 7/64" thick O-1 steel it is screwed and glued into the body. The plane is about 10" long and about 4" high the fence can be used on both sides of the plane. The regular price right now is 250.00 The irons rest against one side of the plane to make setup easy and measurements of where the dado starts a simple ipe block works for the depthstop. Now the plane will have brass parts for the fence. Pics soon
formatting link
planes if wanted have adjustable mouths. Also brass screwcaps if you want
formatting link
marking knives and hammers are now available.
formatting link
made by CHESTER TOOLWORKS LLC and they are made from precision ground 3/32" thick O1 tool steel and are 5/16" wide. Snakewood, East Indian Rosewood, Brazilian Tulipwood, or Gabon Ebony. 44.00 for the snakewood and shipping 39.00 and shipping for the other woods. New plane adjusting hammer
formatting link
CTW hammers are designed specifically for adjusting the blades and wedges of wooden hand planes and infill hand planes. The polished brass and Lignum Vitae head is weighted toward the brass striking end and is designed so that it won't mar or mushroom the blade like steel hammers. The Lignum end is of a smaller diameter and is used to tap the toe or heel of the plane without leaving dent marks. It should also be the end used for tapping wedges tight since it won't damage the heel of the wedge. Handles are individually shaped from Quartersawn White Ash with the grain oriented to prevent the runout which weakens many other hammer handles. 45.00 plus shipping. New plane idea's

Knight Toolworks in conjunction with Harrolson at

formatting link
have had these custom made Japanese irons made for western planes. These are the first and only hand forged/laminated Japanese irons that will fit a regular wedged plane. They are 2" wide and 5.25" long and are a bit over ¼" thick. They will drop into any knight Toolworks plane that uses a 2" iron with just a little mouth and wedge adjustment. They are made from blue steel (holds and edge longer then pretty much any tool steel on the market) and wrought iron. I believe these to be the best irons out there over O-1 and A-2 irons. They will hold an edge longer then A-2 they will get sharper they will leave a deeper/cleaner surface and they make the plane easier to use. They will really help with tearout too. They are hand stamped with Shizu Tani (tranquil valley) Shipping is

5.00 including insurance.
formatting link
formatting link

Please check my page for all my planes

formatting link

I also have razee jointers and jack planes and scrubs.

formatting link
I have great looking/feeling coffin smoothers
formatting link
All planes now have setscrews to center the irons in the body and make adjusting the iron easy.

All planes are sanded/planed and finished with a special oil and wax finish.

Knight-Toolworks

formatting link
handmade wooden planes

Reply to
Steve knight
Loading thread data ...

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.