An a-pawling infeed ripping question???

Pawls are useful after the cut on a table saw.

Would adding another set of pawls on the infeed side of the blade be of any use to prevent kickback?

Reply to
BoyntonStu
Loading thread data ...

No, the kicking is done by the back part of the blade. Eliminate it by using a splitter, proper technique, and standing to the side just in case it happens anyway.

You use a push block/stick too, right? And never use the miter with wood against the fence.

Reply to
Edwin Pawlowski

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.