Latest threads in Woodworking Forumshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
How to cut miters on wide, long pieces?
What is the best technique for cutting 45 degree miters on piece 6" or so wide (too wide for my miter saw), for something like a base trim piece of a cabinet? Also this would be on a long piece...
25
|
15 years ago
|
25 | |
|
|
Liquid Nails Type Products Question
I am putting up 1" foam board on the cellar walls and have a question about "Liquid Nails" type products. The substrate is brick, our basement wall is field stone to the ground level and 24" of brick...
11
|
15 years ago
|
11 | |
|
|
OT: Try turning this!
Planning how to move can be stressful. Get help moving with MYMOVE's free moving checklists, guides, and reviews.
—
|
15 years ago
|
— | |
|
|
What type of router bit to replicate this edge (pic}
Image of edge here: Any ideas? http://xrl.us/befi7n
—
|
15 years ago
|
— | |
|
|
Sloped/Angle routing?
The problem: Creating, for example, angled dados and rabbets or other decorative grooves, with the router. Yes, I know that angled dados and rabbets can be done with table and radial arm saws, but I'm...
5
|
15 years ago
|
5 | |
|
|
OT Humor - That's how the fight started
HAVE YOU HEARD? My wife sat down on the couch next to me as I was flipping channels. She asked, 'What's on TV?' I said, 'Dust.' And then the fight started... My wife was hinting about what she wanted...
—
|
15 years ago
|
— | |
|
|
Need advice on "vice"
Good day all. I have a question concerning an old Stanley No. 700 bench vice that has soft pads. I bought it at a yard sale and for 5 bills it was worth it after a little elbow grease , however the...
19
|
15 years ago
|
19 | |
|
|
What type of router bit do i need to replicate this edge (pic)..
Maybe you can help me and get the wife off of my ass regarding finishing this job. Image of edge here: Any ideas? 100% satisfaction guaranteed. Hassle-free shopping. We help you find the right domain...
7
|
15 years ago
|
7 | |
|
|
Re: Turner on HGTV
5AM out here (DVR already set)
11
|
15 years ago
|
11 | |
|
|
What type of router bit to replicate this edge (pic)
Image of edge here: Any ideas?
12
|
15 years ago
|
12 | |
|
|
On topic! Safety advice; be familiar with new set-ups.
(First, nothing bad happened to me, I made my "tests" with the power off) Hey All, I had purchased some Forest blades - including their blade stabilizer/stiffener -after seeing an in store demo at the...
5
|
15 years ago
|
5 | |
|
|
Cedar and galvanized nails
Has anyone heard that I can't use galvanized nails with cedar wood. Someone has suggested that I will get some sort of chemical reaction. This will be used on the outside of my house with a good coat...
21
|
15 years ago
|
21 | |
|
|
Grip-Tite Magnetic Featherboards // Opinions? (Video link)
Does anybody here have a set of these? do you like them? I get the featherboard part, but do they also push the work against the fence? How much do they cost?
19
|
15 years ago
|
19 | |
|
|
Triton SJA200 'SuperJaws' impression.
The guys at the store know me quite well. . I knew it had to be a good tool, because it resembled one of Morris' ideas. "Go ahead..try the floor model for a few days..if you like it, bring it back and...
7
|
15 years ago
|
7 | |
|
|
Minwax fast drying polyurethane dries to white haze
Purchased last fall, opened yesterday. Stirred as usual, looked ok. Applied with foam brush on test piece of medium pored teak-like wood. Set aside at room temperature and it immediately starts to...
55
|
15 years ago
|
55 |