Latest threads in Woodworking Forumshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
WW Machinery related electrical question
I found a tool that has a plug upon which it says: 30A 600VAC 30 250V Does that mean it is 3-phase? Yes, I know I should be looking at a tag on the motor, but it is inaccessible at the moment. Thanks,...
16
|
9 years ago
|
16 | |
|
|
Using a 1/8" Blade on a Laguna 1412
Has anyone used a 1/8" blade on the Laguna1214? If you have, how did it work out?
17
|
9 years ago
|
17 | |
|
|
Another job completed
On August 27 I started buying white oak for an entertainment center that I build for a customer. In the middle I took a week vacation so this job took me about 8 weeks. Approximately 83" wide x 82"...
55
|
9 years ago
|
55 | |
|
|
Do the glue-up jitters ever go away?
OK. I wasn't in a panic this time, so I guess I've made progress over the last few projects, but I still get agitated anytime I start applying glue. Is everything lined up? Square? Flat? Enough glue?...
32
|
9 years ago
|
32 | |
|
|
I now know why I stopped using dowels
It's been a long time since I doweled something to put boards together. My son wants a nightstand made out of hockey sticks. It's too late to edge glue them together. So I thought I'll use dowels....
10
|
9 years ago
|
10 | |
|
|
Suggestions on a case hardened wood "gift"
Was gifted with about 300 board feet of black ash - surfaced and edged, all 6" wide and 8 ft long. Very beautiful stuff. Now the catch. The wood was rejected by a local mill as being case hardened in...
30
|
9 years ago
|
30 | |
|
|
RE: Flaw Repair
From WoodSmith Tips Lew -------------------------------------------------- Easy Fix for Flaws: Hide gaps and blemishes with this shop-made coverup. http://woodsmithtips.com/l/10a60-189923
9
|
9 years ago
|
9 | |
|
|
Kahiko Table - Hurry, only 1 left in stock!
Product Description: "The 42-by-94 inch Kahiko (Ancient One) table is one of the most unique and expensive tables ever created. The unique grain, known as mega-curl, seen in this particular piece of...
3
|
9 years ago
|
3 | |
|
|
position of integral drawer slides
As soon as I finish tiling our master bath I will be starting on his & her vanities. The vanities will have a total of three drawer stacks, each with five drawers. Being lazy, I have arranged things...
23
|
9 years ago
|
23 | |
|
|
Ping Leon
I'm supposing you reviewed/researched the Laguna LT18 3000 Series, before purchasing the HD16. Why did you choose the HD16, over the other saws you researched? It seems the 18 can perform the same as...
3
|
9 years ago
|
3 | |
|
|
The saga of the wooden San Jose Schools BATHROOM PASS continues
The kids in the San Jose school district ruined the Bathroom Pass! They scraped off the paint to turn it into "DAT ASS". :) I won't even snap a picture of what they wrote on the backside. As you may...
71
|
9 years ago
|
71 | |
|
|
how do I remove chuck on dw 106 dewalt drill.
Chuck will not adjust, is frozen in max open condition. Cannot see screw and can see small hole in end of shaft. Just acquired drill and do not know history. How can I remove chuck
—
|
9 years ago
|
— | |
|
|
bandsaw blade guide adjustment
Still fine tuning / adjusting my new 1412 bandsaw. I assume the ceramic blade guides are supposed to be parallel to the blade. The back of the upper rear guide is ~.025" away from the blade when the...
3
|
9 years ago
|
3 | |
|
|
RE: O/T: Change
Time has certainly brought change. When I first started building the boat, T-Shirts at the T-Shirt store were 5 for $10. Today, those same T-Shirts are 2 for $9. Lew
10
|
9 years ago
|
10 | |
|
|
Advice on Timber Framed structure
Hey all, Just wanted to run a design for a timber framed structure that I am plan ning on building and wanted to appeal to those with more experience than th is weekend warrior for feedback. I plan on...
3
|
9 years ago
|
3 |