Latest threads in Woodworking Forumshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
thickness planer on edge
interesting machine the contouring is a nice feature now i look for a video that shows what is under the hood https://vimeo.com/92210202
6
|
7 years ago
|
6 | |
|
|
Re: Rusty Table Saw Spindle Nut won't come of....
water will dissolve rust oil will not since you sprayed oil first and then torched it the oil should be gone but if not adding vinegar or water will not now penetrate make sure to burn off all the oil...
1
|
7 years ago
|
1 | |
|
|
Progress on the new bed pproject
A few weeks ago I posted a picture of the drawing of the next king sized bed with 18 drawer bottom storage. Monday last week I bought materials to begin building and today this is where I stand. Here...
4
|
7 years ago
|
4 | |
|
|
OT They're doing it right!
Hope and prayers to hardest working couple in show biz as the hurricane plows up the east coast of FL towards their backyard studio in Jacksonville. Yea, it's not woodworking but everybody needs a...
40
|
7 years ago
|
40 | |
|
|
RustyTable Saw Spindle Nut won't come off
Unfortunately I've had no really reason to use my table saw as of late. Sto red in a metal shed, that leaks, moisture rusted my saw. I've cleaned up, w ith a number of things, and looks fairly decent....
16
|
7 years ago
|
16 | |
|
|
Wood Storage - Follow Up
I went with the Fastmount system from Menards. It consists of wall-mounted supports and shelf brackets that just pop into place. I intentionally left the bottom 4' 6" of the space clear, as I intend...
1
|
7 years ago
|
1 | |
|
|
Wood Glue penetration an bonding.
In rereading sealers and end grain, about over sanding =less penetration, I started to wonder about gluing. Found his article and wondered about your experiences in the subject. Advice on Gluing for...
8
|
7 years ago
|
8 | |
|
|
Sears thickness planer issue
I've had this Sears thickness planer for years and it's worked just great, but now my boards are coming out with about a 1/32 twist about every three feet, obviously unacceptable. Of course, I checked...
19
|
7 years ago
|
19 | |
|
|
[ ISM ] Power System Analysis, by John J. Grainger William D. Stevenson
Titles in Physics, Electronics, Electromagnetism, light, Optics, Optical an d Laser Physics, Matter and Interactions, Magnetism, Electronic Circuits, M icroelectronics, Heating, Ventilating and Air...
1
|
7 years ago
|
1 | |
|
|
drive belt
Thank you :)
9
|
7 years ago
|
9 | |
|
|
Good deal on lathe
Pelham, NH http://nh.craigslist.org/tls/5777536141.html
18
|
7 years ago
|
18 | |
|
|
Sealing End Grain For Stain: Pre-Stain or Shellac?
Yes, that is what I am going for, I just don't want the stain so dark that it hides the quarter-sawn end grain. The sides of the headboard are alternating end grain-side grain for the very reason you...
20
|
7 years ago
|
20 | |
|
|
Re: Compound power miter saw brake broke
Momentary or constant? if momentary I assume there is a relay or capacitor in the trigger that applies the voltage. Almost all of these work with the motor turned into a generator when the trigger...
—
|
7 years ago
|
— | |
|
|
How the Domino works
This is a pretty good video showing how the Domino works. I am not impressed with the technique. For certain I see two problems. 1. He is using precise fitting mortises and claims a perfect fit. What...
9
|
7 years ago
|
9 | |
|
|
Finishing Technique Seen On Festool Video - Why Does He Do It That Way?
I'm interested in the finishing technique seen in this video at exactly 2:00. AFAICT he is protecting the panel as he applies stain to the inside edge of the stile, presumably to prevent getting any...
49
|
7 years ago
|
49 |