Latest threads in Woodworking Forumshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Options for replacing/rebuilding cordless drill batteries...
Hello to the group, Like many of you, I have several cordless drills in my studio. Several of them (Dewalt, Bosch, Ryobi) need their rechargeable batteries replaced. However, when you check the price...
6
|
17 years ago
|
6 | |
|
Deft Brushing Lacquer problem
I am using Deft Brushing Lacquer to refinish a mahogany table top. The first coat appeared to go on well. The second coat developed what appear to be craters in various places. I sanded with 320,...
27
|
17 years ago
|
27 | |
|
Trip to Japan
There's a 50-50 chance I'll be going to Japna this spring. If I do, where do I go to find the world class chisels and knives? I just thumbed through Lonely Planet (and the index, too) and didn't see...
15
|
17 years ago
|
15 | |
|
Tool Batteries: A Canadian Source
Hi All, To keep this information from being lost in the old thread, I have copied it into this new thread for everyone to benefit: I have found , by chance, at the Hamilton Woodshow this weekend:...
—
|
17 years ago
|
— | |
|
Bandsaw recommendation
I am in the "I need a new toy" mode and am looking at a bandsaw. Right now, I see the saw as being able to handle basic cutting and some resawing. The resawing I can't see as ever being more than 12",...
22
|
17 years ago
|
22 | |
|
OT Humor: I'm baaack!
Gunslinger & the Old Prospector An old prospector walks his tired old mule into a western town one day. He had been out in the desert for about six months without a drop of whiskey. He walked up to...
13
|
17 years ago
|
13 | |
|
MDF ok for rail and stiles?
On a raised panel cabinet door thats 22 x 44", would 3/4" MDF provide adequate structure for the rail and stiles also? The rail and stiles are 3" wide. It would use MDF for the raised panel and rather...
45
|
17 years ago
|
45 | |
|
Design questions for media storage cabinet
Hi all, I'm working on the design for a media storage cabinet to handle our movie/music collection, and I have a couple of questions I though I'd put to the group: Since DVD & CD cases are "so" narrow...
7
|
17 years ago
|
7 | |
|
Woodworker (UK)
Anybody seen Anton Fitzpatrick's programme? I swear he makes Rico Daniels' stuff look like a heirloom pieces! Loose joints, little to no sanding, and today he made an outdoor table where one of the...
—
|
17 years ago
|
— | |
|
Compressor leak
It is no problem to move components from an old tank to a new tank except, you will want the new tank to be setup as close as possible as the old one. Generally welding brackets etc to a tank changes...
3
|
17 years ago
|
3 | |
|
unisaw switch
My 1940's era unisaw needs a new on/off switch. Any help is appreciated. I don't subscribe to the group anymore, so direct replies work best. The number on the plate is R-430. Thanks! John Minor
10
|
17 years ago
|
10 | |
|
My compressor has a hole in it
I noticed moisture under my compressor. I discovered a pin hole in it. I immediately cut the plug off of the cord so nobody can use it. My question is, has anybody in this group purchased a new tank...
9
|
17 years ago
|
9 | |
|
Cane Holder Need Solved
I carry a cane now, not because I need one about 99.9% of the time, but every once in awhile my knee gives me problems, and then I'm very happy the cane is along. Most of the time it's no bother, I...
4
|
17 years ago
|
4 | |
|
Carbide Planer Blade repairable?
The jointer hand push block to my Makita P12-RA jointer/planer was stored on the planer table and had slid underneath the planer where it remained unnoticed. When I was jointing I suddenly heard a...
2
|
17 years ago
|
2 | |
|
Justification For MORE CLAMS! (in abpw)
Youngest showed up today around noon - looking like he had a mild sunburn. "You been to the beach in this weather? (cold - for California - and rainy) I asked. "No. Why?" he asked "You look like you...
5
|
17 years ago
|
5 |