A couple of problems have arisen whilst restoring this old windmill, does anyone know where I can buy a 360 coving mitre. When using bath seal to run a bead round the back of the bath, it started off ok but as I got to the middle the gap got gradually wider until the whole mastic gun fell through. Another problem is not being able to see the TV because a large sack of flour dangling on a piece of rope is obscuring our view, the whole place is becoming like a millstone round my neck.
Any ideas.
Give me £50 and I'll take it off your hands Dusty
AWEM
I sold my windmill. I used to keep my art collection in it, in particular a priceless work by one of the surrealists. Unfortunately it wasn't mounted as securely as it ought to have been, and it took a tumble and fell into the machinery. I just couldn't stand the Dali grind....
Regards,
Old tip. Stuff toilet paper into the gap, silicone over the top. No one will notice, especially if you finish off with a Fugenboy. They do a Jumbo Fugenboy which will trim a 23" bead of silicone.
Tricky. Have you thought about using self raising flour? That might cause it to rise above the TV so you could see it. Or maybe yeast?
Funny, this is exactly the same as a troll some 5 years ago...
Unfortunately if its listed you wont be able to move the sack of flour, just have to get used to it.
NT
I once bought a nice little corner suite for a lighthouse, never did get it fitted.
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.