Updates at last

At long last my own FAQs have had an update. I have already spotted a couple of boo-boos after uploading, but comments welcome. The changes are mostly of a minor nature but address some of the comments I have recieved either in this NG or by email. Enjoy!

John Schmitt

Reply to
John Schmitt
Loading thread data ...

D'oh URL:

formatting link
Schmitt

Reply to
John Schmitt

mike

Reply to
mike ring

And very good they are too John. Well done.

You mention in the power drills section "if you intend to do a lot of wire-brushing use an angle grinder with an appropriate brush".

I've been looking for a wire brush to fit my angle grinder for ages - anyone know where I can get one?

Dave

Reply to
david lang

Wicks sell a sort of stripper thingie for angle grinders which has the same sort of uses as a wire brush, but rather safer. I use it for paint/surface rust removal on car stuff - it is very quick at that but doesn't damage steel.

Reply to
Dave Plowman (News)

formatting link

Reply to
Grunff

Do you mean the 3M disks? I've used those quite a bit - they're great, but they do wear down quite quickly.

Reply to
Grunff

Reply to
Doctor Drivel

Should be widely available, as a "wire cup brush". Google shows lots of examples, e.g.:

formatting link
can also get "knotted" brushes, which are very hard and solid, for heavy duty use. They're no good on anything delicate.

N.B. wear eye protection, the wires that break off will stick into your skin so wear thick trousers or whatever, too!

Reply to
Chris Bacon

All the usual suspects:

These are effective at light rust etc, and not too aggressive:

formatting link
are far harsher:

formatting link
?id=69369&ts=85074These are often a good half way house between conventional sanding and wire brushing:

formatting link

Reply to
John Rumm

Typo in cement faq:

Sulphate Resisting Portland Cement (SRPC) is for underground work, particularly *rwith*

Also the latter half of that para seems to contradict the first bit: "For the UK it is best to assume that this is the case. Rainwater is effectively distilled water and contains only insignificant amounts of sulphate."

Might want to update references to Dejanews to google...

Builders Vs Sharp sand. I had always associated Builders sand with soft rather than sharp...

not read the rest yet, more anon... ;-)

Reply to
John Rumm

I see I'll have to explain about how rainwater dissolves sulphates out of the soil when it becomes groundwater. Reading through them myself I see a whole load of bits that _still_ need work. London clay, if you go deep enough (>10m) contains the odd gypsum (calcium sulphate dihydrate) crystal.

John Schmitt

Reply to
John Schmitt

Yup, must admit I did not pick up the change of context from ground to rainwater... it would be easy to assume they are equal as well.

Reply to
John Rumm

The previous rewrites have now been superseded. A whole lot of pytos have been eliminated, weblinks added and further explanation and information included. Could've wasted the weekend on fence painting.

John Schmitt

Reply to
John Schmitt

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.