I've just installed some new external TV ariels, which I intended to link to a TV distribution booster/amplifier in the loft.
I checked the picture on them after installation via a TV in the upstairs bedroom, to make sure they were correctly aligned and the picture was crystal clear on both of them (one is for picking up Yorkshire TV, the other for Central).
However, now I've connected them to the booster the picture is somewhat fuzzy, particularly the alternate channels being received from the Central TV aerial. It's not so bad if I connect it to the booster's "full" output, but the individual split outputs leave much to be desired.
Whilst the cable run to the TV's is a bit longer now that I'm running them through the booster, I thought the increased signal gain it provided meant this wouldn't be a problem.
The booster itself is a Videolab 6-way amplifier, like the one at