Hi all
i have a hot water tank with an unusual male thread, i measured it at 32mm OD with 14 threads per inch. A one inch plumbing fitting will screw on for
2 threads then it jams as its thread is too course.Any ideas?
Steve
Hi all
i have a hot water tank with an unusual male thread, i measured it at 32mm OD with 14 threads per inch. A one inch plumbing fitting will screw on for
2 threads then it jams as its thread is too course.Any ideas?
Steve
Could it be 7/8" BSP? 14 threads/inch and 30.2mm OD. maybe it's a tapered thread and you measured 32mm at the thick bit ?
Robert
Could be a M32 x 2 which is 12.7 TPI. Baz
Thanks chaps for your suggestions.
cheers
Steve
Metric diameter/imperial pitch.
Odd! to say the least.
Metric diameter/imperial pitch.
Odd! to say the least.
32mm also is 1 1/4 inch, maybe its an American size?Steve
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.