I have two problems with our dishwasher. The first is that it refused to take on water when the cycle starts. It pumps out any water already there but then stalls when taking it in.
I pulled the machine out and that problem cleared (no doupt to come back at a later date).
The second problem is, now that the machine takes in water it is overflowing from a small hole (about 8mm) in the bottom right hand side of the filling tank, the tank looks like a snaking path that the water must follow and fill befeore being admitted to the machine, this is repeated three times. On the third fill there is a steady trickle of water from the hole.
I have tried adjusting the microswitch on the level float, but this made no difference.
Any ideas?
Wayne