I might want to move a radiator. I'm confident about the plumbing
aspects, I just don't know whether it'll still get hot once I've done
Circuit is 22mm, from which feed and returns of 15mm (all copper) go
to each radiator. There doesn't seem to be any careful magic about
distances so presumably it'll "just work" if I extend the underfloor
15mm pipes by 2-3 metres?
(Y-Plan fully pumped indirect)
Simon Avery, Dartmoor, UK
uk.d-i-y FAQ: http://www.diyfaq.org.uk /
On Mon, 12 Jan 2004 16:04:52 GMT, firstname.lastname@example.org (Simon
That should be OK.
If you had said 10m of extra pipe and a 4kW radiator, I would say
check the flows.
There is a guide on how to size pipework at www.cda.org.uk
You might need to do a slight rebalancing but I doubt even that.
To email, substitute .nospam with .gl
HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.