Hi All, Have a portable oil filled heater. Two castors are broken of the mounting bracket. What strong glue would I use too stick plastic to plastic, please?
Thanks. Regards.
Micky Leeds U.K.
Hi All, Have a portable oil filled heater. Two castors are broken of the mounting bracket. What strong glue would I use too stick plastic to plastic, please?
Thanks. Regards.
Micky Leeds U.K.
Difficult to know as there are many different types of plastic. Some like drainpipes can be solvent welded to a high strength. Many rigid plastics be ok with SuperGlue. The softer flexible kind can be the most difficult. I've found Evostick Serious glue (don't confuse with ordinary Evostick) pretty good with some of these. It does, however, take 24 hours to reach maximum strength.
You may find nothing's strong enough.
NT
Might try car body filler.
Thanks People, Sorted i used super glue . If it fails the epoxy is coommin out !!!!!!!!!!!!!!!!!
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.