How easy is it to install two wall lights onto our bedroom wall? Access to the loft space is easy and I can find the present wiring for the central ceiling light and switch, which will remain, but I want to put two reading lights on the wall . The wall is a plaster and straw lath cavity wall, old but reasonably sound and will take light loads such as lights fittings. Thanks
Brian
Find where the studs are. Pick the two studs between which you want to position the light fitting. Then slide the lid off plastic trunking down between the studs and behind the lathes.
Cut the hole to take the back box for the light fitting, then hunt in the hole for the lid off the plastic trunking. Hopefully you'll have pushed the lid down to where the fitting is going to go.
You'll also need switching to control the separate lights. So you can cut another hole down beside the bed at the height you need, then continue the wiring passed the light fitting to the hole for the switch.
Do you know if you can pick up a continuous supply in the loft for the new lights? Maybe from a junction box on the lighting circuits?
Do you need switching on both sides of the bed to control both lights from either side?
Do you know how two way switching works?
Do you know what rating of cable you'll need for this job?
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.