Fall in guttering

3 rectangular bays to get around, downpipe at each end, direct width about 11m so guttering is about 15m from end to end.

Do folk reckon a 1" difference in height bewteen the middle and both ends (so 25mm over about 7-8m gutter) is a reasonable figure?

Cheers,

Tim

Reply to
Tim Watts
Loading thread data ...

No. 1:100 if you can. Or it will silt up

Reply to
The Natural Philosopher

Thanks - that's doable.

Reply to
Tim Watts

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.