Candy washer arsing me about

Got a Candy CM162 washer, bought new for me by me parents a couple of years ago, worked fine but for the past year or so it's been arsing about,

load it with clothes, close door, bung in powder and conditioner, turn dial to the usual program we use (50 degree mixed synthetics) press the start/pause button.... and.... nothing,

bottom led of the countdown led bar flashes, starts flashing as soon as you select a proggy, always done that afaik,

Very occasionaly it'll start straight up, but usually we have to leave it a minute, then press start again and it'll go... door locked led comes on and away she goes,

but it's getting longer and longer before it'll start up nowadays, tried unplugging it for a while, no difference, wiggled the door and given it a good booting, incase the door closed switch isnt contacting enough, no difference,

any ideas what to look for when i pull it out of the cubby hole it lives in and whip the top off? obviousely the door switch will be first, but i dont think it's that.. as most times we just shut the door, select proggy, try the start button, if no go wait and press it later and it goes, no faffing with the door at all,

Reply to
Gazz
Loading thread data ...

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.