I want to get an almond colored toilet to replace the residential one that is about 20 yrs. old. The new toilets are 1.6 gal/flush. GOOD! I would like to install the Rialto by Kohler but it may be tough to get the Kohler supply fitting to work. A better fit would be the Cadet or Wellworth or Toto. Any recommendations? Bob Larson Redmond WA
The supply for the rialto (K-3404-EB) is only 2-5/8" to center from the floor. The top of the bowl is at 14-7/8". Unfotunely my rough-in guide does not show the height of the bottom of the tank from the floor. It looks very close by eye. You would prob use noburst in a loop to supply it if it did make it. What kind of supply do you have and how big a deal is it to move it really? If you just can't move it and you have a female adapter in the wall you can screw noburst directly into that, or a 90 degree adapter with no-burst. the supply is in the wall not the floor right.
The other toilets sound fine. Make sure it is a 12" from the bolts that hold it down to the wall toi;let. It might on the off-chance be a 10" from the bolts to the wall toilet.
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.