Hand Tool

[robson]

Is there such a tool / hand planer for knocking off edges. Doing some work at the cottage that requires some bull nosing on wood edging. Router won't work as no electricity or generator.

Thanks

[RayV]

Probably one of these would work

[Goedjn]

You're just trying to round over the edges of 3/4" boards with an approx. 3/8" radius curve? A moulding plane would do it, but them are hard to find. It might be easier to just make one. Or use a spokeshave, if there's not that much of it.

[James "Cubby" Culbertson]

Moulding plane would be my first choice. You might look at these:

You didn't specify what size roundover you were looking for (knocking off edges and bullnose are extremes of each other).

[Bill Reece]

if you just want to knock off the edges this is your tool and reasonable at that:

[robson]

Thanks Bill. Thats the one - and the price is right.