We have "repaired" it by using epoxy (2-part glue) and clamping for a
day but that only held for about a month. It is a South facing door
in Colorado with a storm door in front of it so it gets REALLY hot
(melts glue and some varnish on Christmas decorations) even in the
winter! Any glue that would work better? If not, I was just planning
to re-glue and sink 3 screws into the corner that is separating. It
won't look pretty, but it should work. Any other ideas?
Several. Swap out the glass on the storm door for colored glass or
add window tint to the inside of the glass to reduce the heat. Sink
the 3 screws then find some type of trim that would be suitable to add
to both sides of the door to cover the screw.
HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.