Latest threads in Home Repairshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Why not put an electrical copper wire into the weed whacker?
I have the type of weed whacker that takes about a foot long plastic "string". I buy the weed whacker string in bulk, so it's cheap but it only lasts a few minutes in touch terrain. I wonder. Would it...
38
|
13 years ago
|
38 | |
|
Do you bother to sharpen your lawn mower blade? Why?
Does anyone bother sharpening their lawnmower blade? According to the searspartsdirect web site, it costs about $15 for a new lawn mower blade for my Craftsman 917.388853 6.5HP 21" push lawn mower...
103
|
13 years ago
|
103 | |
|
Good small LED flashlights
I want a good, small LED flashlight that uses one or two AA cells. (I do not like AAA cells because they cost the same as AA and have 40 percent as much power. I do not want one with more than two...
72
|
13 years ago
|
72 | |
|
Roof Slate Supply
Vermont Specialty Slate supplies new and salvaged roofing slate shingles to roof contractors and suppliers. Visit us @ Vtslate.com
—
|
13 years ago
|
— | |
|
anti siphon faucet
I am trying to take the handle off of my mansfield does the screw turn clockwise or counter clockwise to take it apart?Also I turn it on and I am not getting but a drip of water. I am sure the thing...
—
|
13 years ago
|
— | |
|
How to protect (low voltage?) wire on TOP of concrete driveway in slot
There's a wire crossing my concrete driveway in the slot which I tripped on and kicked up and need to put back. It just about fits in the groove, almost filling the groove. I think it's for the...
12
|
13 years ago
|
12 | |
|
Best material to level concrete porch from 2 3/4" to zero?
Problem: Old concrete stairs leading to concrete entry porch (5' x 8') have been rebuilt out of wood. New stairs are level. Porch is out of level by about 2 3/4" over 5 feet. Riser height of new...
—
|
13 years ago
|
— | |
|
Sprinkler Pump: 10 GPM @ 30PSI (seem low?)
I have a Myers 1.5HP well pump for my sprinkler. It's about 10 years old. Sitting outside in the elements, I cannot read too much on it anymore. Seems to me that 10GPM is extremely low. Is it and if...
5
|
13 years ago
|
5 | |
|
refrigerator water dispenser leaking
What could be the problem with a water dispenser leaking? The refrigerator is a GE Profile Artica side by side purchased new 8 years ago. When I say, leak, I'm talking about a serious leak. It started...
8
|
13 years ago
|
8 | |
|
doggie doors
I am wanting to install a doggie door to my garage so my hounds can let themselves in and out. I was cruising the net, and I seen one that will install in the wall, has double doors, and does look...
28
|
13 years ago
|
28 | |
|
touch faucets
I see advertisements for these new "touch" kitchen faucets. Do these need an electrical circuit of some sort in order for your skin touching the faucet to make them flow?
2
|
13 years ago
|
2 | |
|
The K-STAR island range hood K-1013 electronic button
The K-STAR island range hood K-1013 electronic button may be predisposed to damage from grease buildup due to the fact that it shares the same space as the air drawn in and the button circuit panel...
1
|
13 years ago
|
1 | |
|
Grade 5 or Grade 8 bolts?
Working on my 40 year old Huskey Bolens garden tractor I found a few broken bolts in the front end and mounting the engine, they were all grade 5 bolts, no idea if they had even been out before. I...
18
|
13 years ago
|
18 | |
|
Carpet cutting
So you overlap one section of carpet over an adjoining section of carpet and you want to cut through both layers so that you will have an almost invisible joint. Is there a knife that really works for...
16
|
13 years ago
|
16 | |
|
Craftsman push lawnmower wobble after hitting rocks won't start
What is the typical thing to look for that broke when my lawnmower hit a stationary object? I've hit much tougher sets of rocks than the little things that all of a sudden caused my Craftsman 18 inch...
56
|
13 years ago
|
56 |