Latest threads in Home Repairshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Request advice on transplanting (and trimming) rampant bamboo to a neighbor's property
Do you have experience trimming and/or transplanting bamboo? My neighbor has noticed the rampant bamboo on my property that I never planted (it came with the house which was a foreclosure): bought...
7
|
12 years ago
|
7 | |
|
Re-aligning door
My front door has shifted Facing out, the hinges are on the right, doorknob on the left Top left corner of door has shifted down by about 1/8" and in by about 1/8" This means that I need to lift on...
9
|
12 years ago
|
9 | |
|
What size inverter
volts times amps equals watts. 120 x 10 = 1200. Larger inverter than that may be needed. Keep the 12 volt cables as fat, and as short as possible. Run more 110 volt AC power cord if you need to....
23
|
12 years ago
|
23 | |
|
Problem with cigarette smoke
I write in hope of some serious answers. I know this general issue has come up before, and wading through the incredulous and the trolls doing a search yields nothing that seems likely to work. Maybe...
111
|
12 years ago
|
111 | |
|
Home lighting via LED bulbs off ebay
Just spent about $20 and bought a couple of LED flood lights, with 120 degree light spread. And a couple LED "corn cob" lights. Anyone else used these? Are they any good? I'm sure I'll find out in...
12
|
12 years ago
|
12 | |
|
Drain pipe in wall to washer outlet?
Anybody know any good step-by-step instructions for going from a 2 1/4 inch plug in a vertical 'plastic' drain pipe (at the floor level) inside the wall to the washer's outlet? I know, I know, a...
22
|
12 years ago
|
22 | |
|
Is sprinkler plumbing normally this complicated (see pictures attached)
I bought a house that had a bunch of broken sprinklers, as evidenced by puddles of water. When I dig down more than a foot for each one, I find they all have this horribly complicated plumbing...
24
|
12 years ago
|
24 | |
|
Masonry work in cold weather?
It's winter in western NY and I never see municipal crews pouring cement sidewalks at this time of year. But my son's working for a mason who uses "products designed to compensate for these...
13
|
12 years ago
|
13 | |
|
What is best exterior vent for stove top hood?
I need to move the stove top vent hood up approx 8 inches [both of us hit our heads on the vent hood, can't even duck under it to cook.] and the existing exterior vent cover needs to be replaced,...
2
|
12 years ago
|
2 | |
|
What to do with poor quality cabinets
Hi, Our kitchen cabinets were built by a local cabinet maker. We live in a Philadelphia suburb, the cabinet make lives in Bucks County. The cabinets are of unacceptably poor quality. Examples include...
31
|
12 years ago
|
31 | |
|
Hard to turn shower faucet controls
On my Mixet shower faucet, the plastic temperature control handle and the plastic volume control knob have become difficult to turn. How can I remove dirt and mineral deposits and apply a lubricant to...
—
|
12 years ago
|
— | |
|
HF bench mill
Speaking of milling machines, I've considered this one from Harbor Freight: too bad fer a small bench mill and only twice as much as a Delta 350 varidrive bench drill press. I was an R&D machinist a...
7
|
12 years ago
|
7 | |
|
Radial drill
Radial drill is a tool fitted with a cutting tool attachment or driving tool attachment. Radial drill is using drill holes in various materials together with the use of fasteners. A radial drill is...
1
|
12 years ago
|
1 | |
|
Milling machine
Milling machine is a machine tool. Milling machine is using to machine sold materials. Surelia Industries is a prominent Manufacturer, Supplier, Exporter and Importer of Milling Machines. Spindle...
2
|
12 years ago
|
2 | |
|
Extra heavy lathe machine
Extra heavy lathe machine manufactured by Surelia Industries. Leveraging on our industrial experience we supply Extra heavy lathe machine. Surelia Industries provides Industrial machines like Extra...
1
|
12 years ago
|
1 |